Features & BenefitsP6205DC to 750 MHz2 pF Input C1 MΩ Input RIntegral Probe Power TEKPROBE BNCApplicationsHigh-speed Digital Systems DesignECLGaAsMOS: CMOS; FastCMOS; BiCMOS; TTLComponent Design/CharacterizationAmplitude levelsAberrationsPropagation Delay and TimingBandwidths and Rise TimesEducational ResearchManufacturing Engineering and TestActive FET Probes for TEKPROBE™ BNC Interface The P6205 Probe is part of Tektronix' line of Low Circuit Loading Signal Acquisition probes for CSA (Communications Signal Analyzers), DSA (Digitizing Signal Analyzers), 11000 Series and the TDS Family of Oscilloscopes. The P6205 is designed with FET devices for its inputs, which allows very high input resistance values and low input capacitances. Both Active FET probes provide a wide linear dynamic input range for essing most digital device families using today's logic voltage levels. Power for the P6205 is supplied by the CSA, DSA, TDS and 11000 Series mainframes through the TEKPROBE BNC Interface, eliminating the need for extra cabling and/or external power supplies. Probe information such as type, serial number, attenuation factor, offset scale factor, input resistance and termination resistance required is communicated through the TEKPROBE Interface between the Active Probe and the CSA, DSA and 11000 Series mainframes. This information is used by these oscilloscope mainframes during the scope initialization sequence and measurement analysis. Benefit HighlightsLow Input C, High Input R –Minimizes circuit under test loadingProbe Power Directly from CSA, DSA, TDS or 11000 Series TEKPROBE BNC Interfaces -Means no additional cables or power supplies required*1Readout Coding for 10x Attenuation –Reduces confusion and errors in measurement readingsGold-plated Replaceable Probe Tips –Improved electrical connections and lower maintenance costsMiniature Size essories –Provides wide range of circuit attachmentsUL Listed –UL 1244Characteristics Probe TypeNominal Cable Length in MetersAttenuationBandwidth at -3 dB in MHzInput C in pFInput R in OhmLinear Dynamic Range in VoltsDC Offset Range in VoltsMax. Voltage in Volts (DC + pk AC)Interface/Readout/Identify*mended Instrument P6205 | 1.5 | 10x | 750 | 2 | 1 M | ±10 | NA | ±40 | TPB/Y/N | 11000*2, TDS400, TDS500, TDS600, TDS700, TDS3000, TDS5000, TDS7000 |
*1Interface/Readout/Identify Code: (TPB = TEKPROBE™ BNC)/(TPS = TEKPROBE SMA)/(BNC = CONVENTIONAL BNC)/(Y = Yes)/(N = No). *211000 SERIES = 11A32/11A34/11A52/11A71/11A72/11A81. Ordering InformationP6205 10x, 750 MHz Active FET Probe. Includes:Retractable hook tip (013-0107-07); 6 in. ground lead with alligator (196-3120-01); 6 in. ground lead with square-pin receptacle (196-3198-01); ground contact, spring (214-4125-00) SMT KlipChip™ adapter (206-0364-01); insulating ground cover (166-0404-01); IC test tip; carrying case; Instruction Manual (070-8202-01). mended essoriesPlease see5 mm Probe essories(miniature) probe system.
| 
点击图片查看原图
新闻中心