| 设为主页 | 保存桌面 | 手机版 | 二维码
普通会员

广州市伊恩埃半导体技术有限公司

ENI(MKS)电源维修,RF射频电源维修,AE(Advanced Ener电源维修,RF generator,plasma ...

新闻中心
  • 暂无新闻
产品分类
  • 暂无分类
您当前的位置:首页 » 供应产品 » 德国BERGER测试仪维修 PSS8维修 PSS10维修
德国BERGER测试仪维修 PSS8维修 PSS10维修
点击图片查看原图
产品: 浏览次数:5534德国BERGER测试仪维修 PSS8维修 PSS10维修 
单价: 1.00元/1.00元
最小起订量: 1 1.00元
供货总量:
发货期限: 自买家付款之日起 天内发货
  询价
详细信息

Modul Flasher PSS 8

The Standard Flasher PSS 8 is a high-power flasher for pulsed solar simulation with constant light usable for up to 10 ms. It is built for test surfaces of up to 2.4 m diagonal and has a repetition rate up to 0.5/min.

High-power flasher for pulsed solar simulation
Constant light usable for up to 10 msec.
Powerlevel variable 500 - 1100W/m2
Non uniformity of irradiance < ±2%
For test surface of up to 2.4 m diagonal
Spectrum AM 1.5
Repetion rate up to 0.5/min

String Flasher PSS 10-S
The PSS 10-S Pulsed Solar Simulator for solar cells can also directly measure shunt resistance (RSH), an indication of wafer damage. If the value for Rsh is too high, it can lead to hot spots in modules, as if the cell was shaded. Rsh could also be calculated using software, which would not be so accurate.

also available for small modules and sunslates
For test surface of up to 0.5 m diagonal or 1.8 m x 0.2 m
Non uniformity of irradiance < ± 2%
Two step illumination in one flash discharge
1000W/m2, directly followed by 500W/m2 illumination
Constant light per step usable for up to 5 msec.
Spectrum AM 1.5
Repetition rate up to 10/min


Single Cell Flasher PSS 10
The Single Cell Flasher PSS 10 and the PSS 10-S have special high-stability capacitors for permanent use in fully automatic assembly lines. They flash once for each cell, but measure it twice. The low-pressure xenon lamp generates a two-step single flash, which leads to two I-V curves. Beginning at a light intensity of 1,000 W/m2, it drops after a flash period of 5 ms to an intensity of 500W/m2 for another 5 ms. This allows the correct measurement of the series resistance (Rs) according to the norm IEC 904-9 (Simulator Class A).


Special high-power capacitors
1000W/m2, directly followed by 500W/m2 illumination
For permanent use in fully automatic assembly lines
Two step illumination in one flash discharge
Constant light per step usable for up to 5 msec.
Non uniformity of irradiance < ±1%
For test surface of up to 0.3 m diagonal
Spectrum AM 1.5
Repetition rate up to 20/min

德国BERGER测试仪维修 BERGER PSS8维修 PSS10维修,
BERGER产品亚太(上海/深圳/香港)维修中心,专家热线:4000666865

询价单