点击图片查看原图
Product Profile
Harmless, Friendly-environmental, Odorless and Convenient
A Better Partner for Your Family Camping, Canteen serving and Breeding！
1. Product Features
1) Function: eradication of mosquitoes, flies and cockroaches as well as lighting
2) Nominal capacity of up to 400mAh
3) Battery life: long and used cycle charging for up to 2000 times.
4) Charging voltage: the power net reaches 2800-4000V at AC110-220V 50-60Hz
5) Protective power switch for enhanced safety
6) An energy-saving, effective and ultra long-life rice LED for lighting
2. Usage
1 ） Charging: Move the switch onto the“Off”position, press the AC plug button down and stretch it out, and then plug it into anAC110-220V socket. The indicator is on, which means your electronic mosquito swatter is charging and finishes till 8-10 hours. When all are down the plug should be moved back into the handle cover in case of a current backflow or an electric shock.
2 ） Methods for mosquito eradication and lighting: Move the switch onto the“Off”position and then press the button in the middle. The indictor is on, which means the metal net is working at a high voltage. No touch on it is allowed at the time. You should hold tightly the handle of the swatter and wield it in the air to mesh mosquitoes or flies. After the operation, you should loosen the button. The indicator is off, which means the net is power off. When the switch is on, the rice LED is on. Lighting and wielding can work together.
3 ）Used time: Fully charged, your electric mosquito swatter can be used for 10-15 days, and LED bead lighting can be used for about 25 hours.
4 ） When yourelectric mosquito swatter is not used for a long time, it shall be charged for 8 hours at three-month interval, in case the cycle life might be reduced.
3. Safety
1 ） This product should be kept away form children.
2 ）Your charging power supply and socket should be installed in compliance with the safety specification
3 ）This product should be kept away from any flammable and explosive when is being charged and the time for charging is less than 24 hours. It is suggested that it should be charged on the day.
4 ） When this product is charged,the switch shall not be moved or the power net shall not be touched in case of a burnout happening to the LED bead or any internal power component or in case of an electric shock.
5 ）When this product is charged, the power net shall be faced downward in case it might be done upward.
6 ）This product cannot be used at a site where flammable and explosive gases or liquids are stored, and the net surface shall not be touched with any metal conductive material
7 ）This product cannot be showered or wetted, and you may slightly brush the power net to drop off all mosquito corpses or any furry cuts over it.
4. Quality Warranty
Warranty for three months as of the purchasing day if it is confirmed that this product hasn’t worked and yet no such a service provided that a non-confirming use and even damage is identified.