Aviation Oil Elite 20W-50
Superior Quality Ashless Dispersant Oil for Aircraft Piston Engines
Aviation Oil Elite 20W-50 is a super premium quality ashlessdispersant aviation piston engine oil. It is formulated from select, highly refined mineral base oils, a polyalphaolefin synthetic base oil, and ashless performance additives providing outstanding engine cleanliness, wear protection, and corrosion protection. Aviation Oil Elite 20W-50 is designed to satisfy the requirements of all opposed piston engine manufacturer’s requirements under a wide range of climactic conditions. It is recommended for all Teledyne Continental and Textron Lycoming engines. It contains the anti-wear/anti-scuffing additives required for some Lycoming engines and it is recommended for all Lycoming engines.
Features & Advantages:
• Semi-synthetic SAE 20W-50 multi-grade engine lubricant
• U.S. Military approved against SAE J1899 which replaced MIL-L-22851D
• Contains the Lycoming anti-wear/anti-scuffing additive
• FAA approved fluid for alternate method of compliance to AD 80-04-03-R2 par. b.1 (For additional information see FAA Special Airworthiness Information Bulletin, No. NE-00-22)
• Compatible with all commercial aviation piston engine oils – both non-dispersant and ashless dispersant type
• Provides excellent engine cleanliness and protection against wear and corrosion
Performance
Aviation Oil Elite 20W-50 has been designed to provide a high level of rust and corrosion protection. The powerful dispersant utilized keeps the engine parts, the turbocharger bearings, the propeller hub and dome, etc... clean of harmful sludge and varnish deposits. As a multi-viscosity grade, the oil will provide easy starting and fast lubrication of critical engine parts under low temperature conditions, while offering high lubricant film strength and low wear under high temperature conditions. Extensive laboratory, engine rig, and flight evaluation tests have demonstrated the excellent performance of Aviation Oil Elite 20W-50.
Compatibility
Aviation Oil Elite 20W-50 is compatible with non-dispersant mineral oils as well as with other ashless-dispersant oils that meet the requirements of MIL-L- 22851D/SAE J1899.
It can also be used in high-time engines that have previously used a straight mineral oil.
If this is done, however, it is advisable to carry out the oil-screen inspection recommended by the engine manufacturer.
Run-In Procedure
New or newly overhauled aircraft engines should be broken in according to the engine builder’s recommended procedure. Many engine manufacturers advise running in on straight mineral oil for the first 25 to 50 hours of operation. In all cases, however, the engine manufacturer’s recommendations should be followed, since the run in procedure can vary from engine to engine.
Health and Safety
Based on available toxicological information, it has been determined that this product poses no significant health risk when used and handled properly. Information on use and handling, as well as health and safety information, can be found in the Material Safety Data Sheet which can be obtained from your local distributor; via the Internet onwww.exxonmobil.com;orby calling 1-800-662-4525 and selecting prompt 2.
For additional technical information or to identify the nearest U.S. ExxonMobil supply source, call 1-800-662-4525.
包装规格:12X1QT/CTN 符合MIL-L-22851
润滑油价格每月都有变化
以上信息如有不详细之处
请洽13391172323 或电邮至terun@yahoo.cn?