山东蜀焊机电设备有限公司

A、机身（3500X18000）                                                                     1套

          由焊接结构宽截面箱形横梁，主副端梁，移动体钢带，小车溜板,后梁等组成。

B、数控装置                                                                                       1套

                 由数控系统由美国海宝MICEDGE、后柜驱动控制箱和纵横向为日本松下交流伺服驱动系统、德国Neugart公司行星减速齿轮箱（免维护）组成。

C、火焰切割系统                      美国捷锐公司                                 2套                                                 

D、等离子切割系统                    美国海宝公司                                 1套

         具有如下功能

1）   自动点火                                                                           2套

2）   自动升降                电容式自动调高                                2套

3）   割炬吊架自动升降行程200mm                                      2套

4）   升降速度20mm

5）   等离子美国海宝max200采用独立升降装置和弧压调高系统穿孔厚度26cm不锈钢穿孔厚度19cm                                                      1套

6）   等离子专用初始定位及防碰撞系统                                 1套

7）   小车溜板                                                                              3套

               E、电气控制面板（安装在机器上）                                                  1套

F、轨道51kg级V71Mn高强度重轨（2m长轨）                       18米

        a.齿条安装基准面与轨道侧面平行度≤0.02mm

         b.轨道两侧面尺寸公差≤0.02mm

           c.轨道两侧面与顶平面垂直度≤0.02mm

G、橡胶气管                                                                              1套

H、电气电缆                                                                    1套

I、纵向拖链                                                                         1套

J、横向拖链                                                                                  3套

K、气管/电缆进口处的电缆支撑架                                             1套                                              

L、工具                                                                               1套

M、必备资料