点击图片查看原图
Product name | Nylon printing paste |
State | Paste |
Packing | 25KG/drum for white,20KG/drum for clear |
Storage | 6 months in cool place |
Application | Suitable for waterproof fabric, mercerized cotton, nylon, TPU, PU etc. |
Features | 1. High elasticity 2. Extra fastness 3. SGS detecting passed, no PVC, no heavy metal, no NPEOs |
Mix proportion | Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?% Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?% |
Printing process | 1. Printing with clear printing paste for 1-2 times 2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly. 3. Printing again for 3-4 times (3-4 scrapes per time). 4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃ 5. Finish. |
Attentions | 1. Please drying paste surface with cold air each time before re-printing. 2. The pigment is max 12%, otherwise it’ll be easily faded. |
品名 | 高级尼龙胶浆 |
外观 | 糊状 |
包装 | 白胶浆25KG/桶，透明浆20KG/桶 |
贮存期 | 常温下6个月 |
应用 | 防水涂层布、丝光棉、硅油布、尼龙布、也可用于TPU、PU等皮革等 |
卖点 | 1. 超强牢度耐水洗 2. 手感柔软 3. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求 |
调配比例 | 印浅色：白胶浆70-80% + 透明浆20-30% + 固化剂3% + 色种？% 印深色：白胶浆20-30% + 透明浆70-80% + 固化剂3% + 色种？% |
工艺流程 | 1. 丝网选用100-120目，用丝印硬方刀75度刮印, 以透明浆打底1-2次 2. 将白胶浆，透明浆，色种，固化剂搅拌匀印2-3次 3. 24-48小时自然干燥，或150-180度焙烘1-3分钟 |
注意事项 | 1. 加入固化剂的尼龙浆必须在4~8小时内用完 |
供应广印牌GR-9401A尼龙胶浆