点击图片查看原图
产品简介
用途：有一个或一个以上电路接线可插入的座，通过它可插入各种接线，便于与其他电路接通
适用行业：适用于：电视机,LCP,PDP,电脑,笔记本,手机,家电,视听,影视等领域.
简单描述：与插入式元器件(如插头、电子技术指标：
管、继电器等)相配接的连接器 技术指标：
使用温度范围 -30-70℃ 耐压 AC500V(50Hz)/min
额定负荷 DC 30V 1A 动作力 5~30N
接触电阻 ≤0.03Ω 寿命 5000次
绝缘电阻 ≥100MΩ 客服热线0577-62120553 手机；18958829728
顺星电子厂专业生产AC插座，电源插座 品字插座 款式齐全 AC电源插座AC-01
AC电源插座AC-09
AC-02电源插插
1. Rating額定值: | AC 250V 10A | |||
2.Operation temperature range使用溫度範圍: | -20℃~+70℃ | |||
3.Preservative temperature range保存溫度範圍: | -25℃~+80℃ | |||
4. Construction dimension結構尺寸: | Apply to the appended drawing:符合附加圖紙 | |||
Item项目 | Test condition測試條件 | |||
5.Electrical characteristics電氣性能 | ||||
5A | Contact Resistance 接觸阻抗 | Being measured at 1KHz small current contact resistance meter. 在1KHZ小電流下測量. | ||
5B | Insulation Resistance 絕緣阻抗 | Measurements shall be made following application of DC500V potential across terminals and across terminals and frame for 1 minute. 在端子之間和端子與殼之間加DC500V條件下,持續1分鐘測量. | ||
5C | Withstand Voltage 耐電壓 | AC1500V (50Hz or 60Hz) shall be applied across terminals and across terminals and frame for one minute. 在端子之間和端子與殼之間加AC1500V(50HZ或60HZ)條件下,持續1分鐘測量. | ||
6. Mechanical characteristics機械性能 | ||||
6A | Insertion and Extraction force 插拔力 | Being measure at across spring piece and across matching plug for ergometer. 用測力計在插頭與彈片之間進行測量. | ||
6B | Terminal Strength 端子強度 | A static force of500gfbeing applied in one direction on the tip of terminal for 1minute. 将500克之靜負荷施加於端子頂部的一個方向持續1分钟。 | ||
7. Durability耐久性 | ||||
7A | Soldering test 可焊性試驗 | The tip of the terminals shall be dipped 2mm in the solder bath at a temperature of 240±5℃for 3±0.5sec. 端子頂部被浸入焊錫池2mm深,溫度240±5℃,時間3±0.5秒。 | ||