义乌市杰诺电子有限公司

User’s Guide

Thank you for using our products! It is our honour to serve you.Read below instructions carefully before using our product for your rapid programming and operating.

Users’ common problems

Respected customers,

        How are you! Aomao energy-saving units for air-conditioner have three styles:  Aomao-I type energy-saving unit special for former (1950s) air-conditioner, Aomao-I-1 type energy-saving unit special for former (1950s) air-conditioner, Aomao-III type energy-saving unit for modern new type air-conditioner. Their technical functions are completely different, among them, Aomao-I type can run as long as the power supply is connected directly; Aomao-I-1 type  can run only it is connected with the AC wire of compressor, and Aomao-III type can run only it is connected with the DC temperature sensing wire head.

User's usual problems

AOMAO-Ⅰ-1 air-conditioner energy-saving unit is suitable for former window-ype air-conditioner or modern hang type or cabinet type IT-3T air-conditioner of 220V.

Notice:380V air-conditioner of 5T above must use AOMAO-III-2type air-conditioner energy-saving unit.

Energy-saving purpose will reach above 30% for 4h.

nstallation & operation methods for former drawing various air-conditioner energy-saving unit

Sincerely thank you for purchasing AOMAO intelligent power saver for air condition.Please read the manual carefully before operation.

Notice:

Wiring of AomAo-I-1 energy saving unit for window type air-conditioner

① Before mounting the window type air-conditioner, remove the front cover, connect it to the AC220V wire of compressor.

② (See the installation drawing) disconnect any one of the AC 220V two wires (that are connecting with the temperature controlled switch) of compressor, then connect it to the master wires (two wires of about 1.3m) from the bottom of energy saving unit in series respectively, wrap them with rubberized fabric (two pieces of thermal contraction pipe are attached as accessories).

③ This wiring mode is suitable for one type of window type air-conditioner.

④ After fishing wiring, the energy saving unit can be put on or put in the cabinet type air conditioner, also can be wall-mounted, take such measures as one suitable to local conditions.

⑤ Connect the power supply of energy saving unit to the power output panel of 220V, the indicator lamp flashes for while and stop, this means that the unit is normal. When the energy saving unit is left without using, please pull out the plug.

⑥Special notice: only when the wiring is confirmed correct that the installation can be carried out, never connect it to the wire port randomly, otherwise, circuit of energy saving unit and air-conditioner may be broken.

1.   Refrigerating temperature should below 20℃,warming temperature should above 28℃.

2.   Cut off the power when not using the air condition,At the same time,close the power switch of power saver.

3.   When switching on the air condition,must turn on the power saver at the same time,The saver is accurately controlled by microcomputer when operating,to reach the optimum efficiency of saving powerl.

4.   Close the switch when not using the power saver.Operating direcfly through the original

Working signal of air condition.

Notes:There is another special condition abroad.While the inductive head of air condition outputs AC voltage,user should use electroprobe to test the inductive head before installing.If it outputs AC voltage,user should avoid using the energy-saving unit.

Power saving index for testing： Save power of 12-20% in 2 hours,20-25% in 3 hours and 25-42% after 4 hours.

Ⅰ、Operation method

AOMAO-Ⅱsearch for corresponding type code

1.Users firmly believe the brand of AOMAO.  2. The quality of energy-saving unit  in  the market has much technical disfigurement.  3. The product of our company passed the success discussion of development technology only one time in the provincial authentication meeting in May 21th, 2005 by

state energy-saving experts.

Conform to: GB/T1.1-2000  by: Q/AMJOO1-2004

Ⅱ、Product characteristics

1、AOMAO-Ⅱsaves electric energy of 25%-42%；2、No need to connect and refit,Wireless control.3、Original design, easy to operate.4、Visual effect, use and know immediately.5、With high performance microcomputer chip, stable working performance, reliable and durable.6、With precise microcomputer frequency conversion control technology, more health and power-saving.7、Suitable for former window type or cabinet type air-conditioner.8、Universal for 1-5T air condition.

Ⅲ、Working principle and applicable range

The product adopts the advanced frequency conversion parameter control technology of Honda company in Japan, regulate through the corresponding frequency conversion with the specific requirements of range of temperature to human body,control the range percent of room temperature to an applicable one, set up the optimal regulating rule for power expenditure control range for compressor to make the system be in the optimal working status with least power expenditure. You can choose proper mode of operation by yourself according to your personal specific requirements to living room temperature,change passive consumption to subjective control, which not only can reach the optimal energy-saving effect, but also can obtain comfortable room temperature.TypeⅠ-1energy-saving unit for air condition is applicable to hotels/households with areas of 10-15m2.TypeⅠ-2energy-saving unit for air condition is applicable to guest hall/marketplace/office/public places etc with areas of 15-100m2. Because there are too many people, big fluctuation of thermal load and bad airproof performance in the above mentioned sites, which make the air condition run without stop and cause a great deal of power consumption. This type of saver will make the air condition run in the optimal working status through the control of microcomputer intelligent power saver under the precondition of not affecting temperature and comfortable sensation, simultaneously avoid the man-made improper operation which may cause the lose of electric energy. The power saving rate will up to 25%-42%, which can largely reduce your operational cost.

Ⅳ、Points for attention

1、Away from liquid, heat source.Avoid serious collision or dust,moisture entering into the sender unit.2、Any hamper is not allowed between air conditions.Please confirm whether your air condition is in good receptivity.

TypeⅠ power saver is with wireless control, no need for any connection and refit and will not bring any side effect to the air condition. Please rest assured to use!

Ⅴ、After service

We guarantee to keep the product in good repair for 1 year. Any man-made phenomenon or force majeure such as disassemble automatically, shell breaks and lacking in components all not remain with in the maintenance range.

Ⅵ、Cost recovering

Take 2P air condition of one family to calculate,2000W for 1 hour, the power expenditure will be 2 degrees.If air condition runs 10 hours every day, the power expenditure will be 20 degrees and it will be 600 degrees for 1 month. If 1 yuan/ degree, the electric charge will be 600 yuan one month. Using the air condition for 10 months in one year, the total electric charge will be 6000 yuan. However, AOMAO power saver will save 30% for you, i.e. totally in 2100 yuan. Thus the recovering investment time is extremely short for user.For publics or family that need large power expenditure, the saved electric charge will be more. All users can recover cost by saving electric charge within about 2-4 months.The working life of power saver is 12 years.