本机组采用:
1,PLC集中控制,操作方便。
2,温控精度高,2度之内,巡回检测,动态显示。
3,加热箱采用封闭式,从室温到设定温度加热时间短,保温效果好,大幅度节能,避免工作环境大幅温升。、
4,卷绕采用恒张力卷曲,确保成型和退绕。
5,牵伸范围1-9倍
6,温度范围室温-400℃。
7,牵伸后纤维细度可达200D.
适合对聚氟四乙烯单丝或合股丝,尼龙长丝等塑料丝进行牵伸,达到理想细度。
1, PLC centralized control, easy to operate.
2, temperature high precision, within 2 degrees, touring inspection, dynamic display.
3, heating box adopts closed from room temperature to set temperature, heating time is short, heat preservation effect is good, further energy-saving, avoid working environment temperature rise sharply. ,
4, winding adopts constant tension curly, ensure molding and retreat around.
5, drafting range 1-9 times
6, temperature range 0℃ - - 400.℃
7, draft after fiber fineness can reach 200D.
Suitable for poly fluorine ethylene monofiber four or partners silk, nylon filament plastic wire for drafting, to achieve the ideal fineness.