华商宝

参数：

*          型号       过纸长度      印刷长度    工作速度（片/分）   

*          2400        2400mm       2200mm    （片/分）：60          5.5kw

*          版辊φ468mm   内档2500 mm

功能与特点：

*          整机墙板厚度实心为40mm、重要部件、均由高精度加工中心制做The thickness of the solid core wallboard is 40mm; the key parts are all made by high-precision machining center.

*          所有传动轴、辊材质均为优质钢，高精度动平衡校正、镀硬铬，表面研磨。All driving shaft and roller are high quality steel, high-precision dynamic balance correction, hard chromium plating and surface grinding.

*          主轴锁紧采用高钢性涨套锁紧，比传统键锁紧精度更高，方便拆装。Main shaft locking using high rigidity of locking, have higher accuracy than the traditional key locking , convenient to dismounted

*          全齿轮传动，钢件淬火斜齿传动，长期使用，套色精度高.All the gear transmission, steel parts quenching inclined gear transmission, is used for a long time, high precision adjustment

*          整机传动部位采用卫星摇摆式、消除连接间隙、适合长期高速印刷，三层、五层、七层纸板套色精度更高。The transmission part adopts satellite swing type, eliminating connection clearance, suitable for long time high-speed printing. Matching color precision is higher for 3-layer, 5-layer and 7-layer.

主要技术参考：

*          机械速度（片/分）：80

*          经济速度（片/分）：50—60

*          最大印刷面积：2200mm×1450mm

*          最大纸板尺寸：2400mm×1450m

*          标准印版厚度：3—8(可调)

*          开槽刀厚：7mm

*          Max mechanical speed (piece/min):80

*          Economic speed (piece/min): 50-60

*          Max printing area: 2200mm×1450mm

*          Max paperboard size: 2400mm×1450mm

*          Thickness of standard printing plate: 3-8mm (can adjust)

*          Thickness of slotting knife: 7mm

印刷部功能：

*          本机为链条送料半自动印刷机

*          采用重型地轨，保证设备运行及分离的稳定性

*          气动隔膜泵供墨方式，可以任意调整上墨的流量，提高上墨均匀度。（不含气泵

*          机采用360度电脑数控快速相位调整，读数盘显示，附有自动计数装置。

*          全摇板设计，全齿轮传动，减少套色误差，调整轴间隙时齿轮咬合间隙不变。

*          进纸设计为十字滑块，加强精度

*          主动齿轮全钢件淬火，保证使用寿命。

*          墨辊部可气动升起并单独转动，以防停机时油墨干涸

*          各机组电动分合体，自动锁紧，放松，附有警铃提示

*          各机组电动分离，配有碟璜式离合，气动分离锁

*          配置同步调刀，使机器调整时间大量减少，提高生产效率

*          开槽、压痕、间隙调整采用自锁卧轮合结构

*          采用喷淋油泵分组供油，提高设备润滑

*          全设备使用φ25冷拔（不用镀锌管）调节，减少拧曲误差

*          压印轴与过纸轴全部直径为φ130mm

Printing part functions:

1.      This machine is common printing machine of chain feeding.2.      Adopt heavy rail to ensure the equipment’s stability of working and separating.3.      Pneumatic diaphragm pump give the ink, you can adjust the flow of the ink at will to improve ink evenness (not including air pump)4.      Adopts 360 degrees computer numerical control rapid phase adjustment, reading dial set, with an automatic counting device.5.      The rocker panel design and all the gears transmission to reduce the errors of color-matching. When adjust the axis space, the meshing gap remains the same.6.      The paper-feeding way was designed to cross slipper to strengthen the accuracy.7.      The gears are steel parts quenched, ensure service life.8.      Ink roller part can rise pneumatically and run alone, in case printing ink dries up when the machine stop.9.      Every unit electrical separating and automatic locking, relaxing, with the alarm hints.10.  Every unit is separated by electric, equipped with disc spring type clutch.11.  Equipped with synchronous blade adjustment, reduce the time of adjustment to improve production efficiency.12.  Slotting, creasing and gap adjusting adopt self-locking structure.13.  Use spray pump group oil supplying to improve equipment lubrication.14.  All the equipment use cold-drawing (not galvanized tube) adjustment to reduce twisting error.15.  The diameter of coining shaft and paper shaft are both 130mm.