你现在的位置:

供应WAZAUEN60950热丝引燃测试仪价格

 供应EN60950热丝引燃测试仪  德国原装进口Wazau 热丝引燃测试仪测试仪满足EN60950等相关标准,进行试样燃烧性的描述.一个热丝

  • 产品单价: 8888.00元/台
  • 品牌名称:

    WAZAU

  • 产地:

    广东 深圳市

  • 产品类别:

    燃烧/阻燃试验设备

  • 有效期:

    长期有效

  •  
留言询价 加入收藏
该企业其他产品更多»
水平垂直燃烧试验仪|独立延伸操作模块|使用更方便|厂家直销
¥18000.00 421人浏览

水平垂直燃烧试验仪|独立延伸

推荐
盐水喷雾试验机
¥面议 323人浏览

盐水喷雾试验机

推荐
供应WAZAUDIN|EN71-2玩具和材料的防火测试仪价格
¥888888.00 832人浏览

供应WAZAUDIN|EN71-2玩具和材

推荐
单档弹簧冲击器|1J弹簧冲击锤|0.7J弹簧冲击锤
¥88.00 897人浏览

单档弹簧冲击器|1J弹簧冲击锤|

推荐
供应德国原装进口LPK型可焊性测试仪,LPK型可焊性测试仪价格
¥面议 477人浏览

供应德国原装进口LPK型可焊性

推荐
  • 产品详情
  • 网友评价

产品参数

型号: EN60950 品牌: WAZAU
起订: 供货总量:
发货期限: 自买家付款之日起 7 天内发货 所在地: 广东 深圳市
有效期至: 长期有效 品牌:WAZAU

详情介绍

 

供应EN60950热丝引燃测试仪  德国原装进口Wazau 热丝引燃测试仪

测试仪满足EN60950等相关标准,进行试样燃烧性的描述.一个热丝将试样环绕5圈加热,直到样品被点燃或者加热超过120秒.

The Hot Wire Ignition Test reference to EN60950 and other relevant standards

This devices serves the characterization of the ignitibility of samples.

A heating wire is wrapped around a sample five complete turns and heated up.

The test is continued until the specimen ignites or after 120 s have passed

1.Setup

Before using the device for the first time the power cord must be connected to the power supply. The voltage input for the supply voltage is an universal input for voltages ranging from 85 – 264 VAC (47 – 63 Hz). The device is turnt on by means of the main switch on the rear side. The maximum voltage on the heating wire is 11.5 V with a maximum current of 10 A. The timer is limited to 120 s.

2.Test winding:

A 250 mm ± 5 mm length of nichrome wire (nominal composition 80% nickel, 20% chromium, iron-free) of approximately 0.5 mm diameter and having a cold resistance of 5,28 Ω/m is used.

3.Samples:

Five samples of each material are tested. The samples are 130 mm long minimum by 13 mm wide and of a uniform thickness. Edges are to be free from burrs, fins,etc

4.Conducting a test

Turn on the device on the rear side. The device is now in a stop mode with no voltage applied on the wire connections (picture 1).

Take the supplied wire according to EN 60950 and make it 250 mm ± 5 mm long. The wire has to be connected in a straight length to the wire connections (picture 2). Push the button START and adjust the voltage by means of the potentiometer to the desired value. The power dissipation of the wire must be 0.26 W/mm ± 4% for a period of 8 – 12 s (picture 3). once this step is completed push the button STOP and DO NOT change the voltage anymore by means of the potentiometer!!

Wire: l = 250 mm

     R = 5.28 Ω/m

P = 0.26 W/mm           R = 5.28 Ω/m

P = 0.26 W/mm x 250 mm  R = 5.28 Ω / 4

P = 65 W                R = 1.32 Ω

U = √ P x                R I = P / U

U = √ 65 W x 1.32 Ω       I = 65 W / 6.3 V

U = 9.3 V                I = 7 A

After cooling, the wire is wrapped around a sample to form five complete turns spaced 6 mm apart.

The specimen has to be mounted to the device using the milling screws (picture 4). Start the test by pushing the START button with the dissipation power tested before of 0,26 W/mm ± 4% in the wire. The test is continued until the specimen ignites or after 120 s have passed. The device turns off automatically after 120 s. The test can be terminated before 120 s have passed by pushing the STOP button.

The time passed since starting the test is displayed on the display TIME (picture 5).

For specimens that melt through the wire without ignition, the test is discontinued when the specimen is no longer in intimate contact with all five turns of the wire.

The test is repeated on the remaining specimens.

5.Compliance criterion:

The average ignition time of the specimens tested shall not be less than 15 s

网友评价 0条 [查看全部]