华商宝

车内空气质量检测仪特点

型号 ;G90066
（人机对话对话数据调整）除了具备六合一所有功能外，更增加了人机对话菜单，温湿度时间显示一体数据调整功能，可以现场打印出即时温湿度时间及检测数据，人机对话菜单设计更为合理，使用更便捷，由于采用进口分光IC,内部分光组构件采用模具制作，使得检测数据较同类产品更为稳定，绝对不会像同类产品出现同两台机器数据不一致现象，蓝屏背景灯光更为美观大气，完全符合国际甲醛检测标准，是目前国内较为领先水平的一款室内环境检测仪器。
车内空气质量检测仪连接正面图：
1. 本产品下常使用温度范围为0—40摄氏度之间。
2. 低于0摄氏度或高于40摄氏度时，可能出现变色界面发虚的情况，读数时将发虚部分除以2即可。
3. 切割检测管时尽量使切口直径大下些，但要注意不要让试剂漏出。
4. 时间控制器上的“复位”键的作用是使用时间重新返回设定值。
车内空气质量检测仪注意事项
1.本产品需要保存在通风良好，空气干燥的室温条件下，注意防水、防晒、防潮、防腐蚀性气的侵扰。
2.按通电源时请注意安全。
3.检测管用完后要谨慎处理，防止扎伤，管理的粉末请勿使用。
4.为保证检测的准确性，本检测仪必须使用专用的检测管
车内空气质量检测仪检测范围：
甲醛 0--16 10-20 氨 0--4 10-20 苯 0--4 10-20 甲苯 0--4 10-20 二甲苯 0--4 10-20 TVOC 0--4 10-20
1. 流量稳定性：>95%
2. 定时控制：0—99分钟
3. 功率：6X6瓦
4. 电源：220V交流电
5．主机尺寸：340×260×145（mm）
6. 重量：4.6kg
7. 兰色背景灯，便于阴暗天气使用
8. 可同时检测6种气体
车内空气质量检测仪随机赠送：
1.三角架1个
2.流量器1个
3.气泡吸收瓶1个
4.电源线
5.塑料软管2条
6.说明书 1本
7.视频教程一份

In car air quality detector characteristics
(man-machine dialogue data adjustment) in addition to Liuhe all the functions, more interactive menu, temperature and humidity display time integrated data adjustment function, can print out the real-time temperature and humidity time and detection data, man-machine dialogue menu design more reasonable, more convenient to use, because of the use of imported light IC, internal optical components using mold making, which makes the detection data than similar products more stable, not like similar products with two machine data inconsistency, blue background light is much more elegant, fully in line with international standards for formaldehyde detection, is currently more advanced level of an indoor environment testing instruments.
In car air quality detector is connected with the front view:
1 this product under the regular use of the temperature range of 0 - 40 degrees celsius.
2 lower than 0 degrees Celsius or above 40 degrees Celsius, may appear discoloration interface virtual situation, reading will be imaginary part can be pided by 2.
3 cutting test tube to make cutting diameter big some, but be careful not to let the reagent leakage.
4 time controller of the "reset" button is used to return the time setting value.
In car air quality tester notice
1 this product needs to be kept in a well ventilated, room temperature air dry conditions, pay attention to the waterproof, sunscreen, moisture-proof, anti corrosive gas intrusion.
2 according to the power supply is connected please caution.
3 detection tube after careful treatment, prevent injuries, do not use powder management.
4 in order to ensure the accuracy of detection, detection of the detector must use special tube
In car air quality detection range:
0--16 10-20 0--4 10-20 formaldehyde ammonia benzene toluene xylene 0--4 10-20 0--4 10-20 0--4 10-20 TVOC 0--4 10-20
1 flow stability: > 95%
2 timing control: 0 - 99 minutes
3 power: 6X6 watts
4: 220V AC power supply
The 5 main dimensions: 340 x 260 x 145 (mm)
6 weight: 4.6kg
7 blue background light, easy to use dark weather
8 simultaneous detection of 6 kinds of gas
In car air quality detection instrument were given:
1 tripod 1
2 flow device 1
The 3 bubble absorption bottle 1
4 power line
The 5 plastic hose 2
The 6 Manual 1
A 7 Video Tutorials

产品为冠 源于精测

     精品摇篮 王者之选