华商宝

炭阳极用煅后石油焦粉末电阻率测试仪

产品名称：炭阳极用煅后石油焦粉末电阻率测试仪

产品型号：GEST-124

满足标准：YS T 587.6-2006 炭阳极用煅后石油焦检测方法 第6部分：粉末电阻率的测定.pdf

主要技术指标：

一 测量范围： 电阻 10-5----106Ω，分辨率 10-7
二 测量误差： 10-4---106Ω， 0.15%
10-5 Ω, 0.25%

三 系统配置：

测试主机：

1 数字电压表：量程： 2mV ,20mV, 200mV ,2V

分辨率： 0.1uV，1uV，10uV，100uV

量程误差： 2mV 档: 0.1%读数+ 6个字

20mV, 200mV, 2V档： 0.1%读数+ 2字

2 直流恒流源： 输出： 100uA,1mA,10mA,100mA,1A

误差： 100uA,1mA,10mA,100mA： 0.1%

1A， 0.15%

3 多窗口显示界面：实测电压；电阻率；机箱内温度；正向电压值；负向电压值；电阻率

（系统根据输入值和测试值自动运算）。

4 测试夹具符合:YS/T 587.6-2006

粉末量杯的基本尺寸：

1、有 10mm,6mm内经两种

2、电压端子间距 固定 10mm

3、电流下端子距离下部电压端子 10mm, 电流上端子是活动施压的部分，距离上部电压端子距离 10mm<S< 21.5 ,即粉杯最大装粉量为 ：

6mm粉杯： 607.59毫升（-141.3毫升，即建议至少留5mm的空间容纳电流电极）

10mm 粉杯：1687.75毫升（-392.5毫升，即建议至少留5mm的空间容纳电流电极）

4、粉杯总高度： 86mm< H<107.5

5、粉末施压 10mm粉杯 ： P <3.5MPa

6mm 粉杯 ： P<10.4MPa

注：以上为现有设计粉杯的基本参数，可以按用户要求定制整套测试夹具

Carbon anodes calcined petroleum coke powder resistivity tester

Product name: carbon anode with calcined petroleum coke powder resistivity tester

Product Type : GEST-124

To meet the standard : YS T 587.6-2006 carbon anode Calcined petroleum coke test methods - Part 6 : Determination of resistivity powder . Pdf

The main technical indicators:

A measuring range: Resistance 10-5 ---- 106Ω, resolution 10-7
Two measurement error : 10-4 --- 106Ω, 0.15%
10-5 Ω, 0.25%

Three system configurations :

Test host :

A digital voltmeter : Range : 2mV, 20mV, 200mV, 2V

Resolution : 0.1uV, 1uV, 10uV, 100uV

Range error : 2mV file : 0.1% of reading + 6 words

20mV, 200mV, 2V file: 0.1% of reading + 2 characters

2 DC current source : Output : 100uA, 1mA, 10mA, 100mA, 1A

Error : 100uA, 1mA, 10mA, 100mA: 0.1%

1A, 0.15%

More than three windows display interface : measured voltage ; resistivity ; temperature inside the chassis ; Forward voltage value ; negative voltage value ; resistivity

( The system according to the input value and the test value automatic operation ) .

4 test fixture meet : YS / T 587.6-2006

Basic dimensions of the powder measuring cup :

1, there is 10mm, 6mm Neijing two kinds

2, the voltage terminal spacing fixed 10mm

3, the current from the lower terminal voltage terminal 10mm, the current pressure on the part of the terminal is active , the distance from the upper voltage terminals 10mm <S <21.5, ie powder Cup largest amount of powder is:

6mm pink cup: 607.59 ml ( -141.3 ml , which suggested leaving at least 5mm of space to accommodate current electrode )

10mm Pink Cup: 1687.75 ml ( -392.5 ml , which suggested leaving at least 5mm of space to accommodate current electrode )

4 cups flour total height : 86mm <H <107.5

Five , pressuring 10mm pink powder cup : P <3.5MPa

6mm pink cup : P <10.4MPa

Note : The above is an existing design pink cup basic parameters , can be customized according to user requirements entire test fixture

 更多与炭阳极用煅后石油焦粉末电阻率测试仪 产品相关欢迎您来电咨询  010-57462906 15311714256