一、用 途
1、xk系列炼胶机主要供橡胶混炼、压片、塑炼等。
2、sk系列炼塑机主要供塑料混炼，压片等。
3、xk系列破胶机用于生胶的破碎，也可用于再生胶的破碎。
序号 | 型号规格
参数名称 | x(s)k
160 | x(s)k
250 | x(s)k
360 | x(s)k
400 | xk-450 | xk-560 | xk-400 | xkp-450 | xkp-560 | 1 | 辊面直径
mm | 160 | 252 | 360 | 400 | 450 | 560
/ 510 | 400 | 450 | 560
510 | 2 | 辊面长度
mm | 320 | 620 | 900 | 1000 | 1200 | 1530 | 600 | 610 | 800 | 3 | 前辊线速度
m/min | 8.95 | 15.26 | 16.26 | 18.62 | 23.85 | 28 | 18.62 | 23.85 | 26 | 4 | 辊筒速比 | 1:1.35 | 1:1.10 | 1:1.25 | 1:1.27 | 1:1.27 | 1:1.2 | 1:1.27 | 1:1.27 | 1:1.3 | 5 | 最大轴距
mm | 4.5 | 8 | 10 | 10 | 10 | 15 | 10 | 10 | 15 | 6 | 一次加料量
kg | 1-2 | 10-15 | 20-25/12 | 20-35/18 | 30-50/24 | 50-60 | | | | 7 | 电机功率
kw | 5.5 | 18.5 | 30 |
40
| 55 | 90/95 | 45/55 | 55/75 | 75 | 8 | 电机转速
I pm | 960 | 970 | 980 | 980 | 980 | 990 | 980 | 980 | 990 | 9 | 外形尺寸 m | 1120×920×129 | 3.5×1.35×1.5 | 3.92×1650×1.725 | 4.31×1.800×1.88 | 5.05×1.92×1.870 | 6.3×2.3×2 | 3.8×1.7×1.8 | 4.6×1.9×1.9 | 5.1×2.3×2 | 10 | 机器重量 T | 1:1 | 3.5 | 5.53 | 8.14 | 13 | 22 | 7 | 11 | 19 | 11 | 破肢能力
kg/n | | | | | | | 200 | 400 | 2000 |
|
|
|
| |
| [用途]
生产40-100目的精细橡胶粉体。
[结构与原理]
该机由叁台粉碎主机，旋风收集机构、整套电器设备等组成。主机由机架、主电机、无级变速电机、送料机构、调节机构及一对动磨盘和定磨盘等组成。其基本原理为通过两磨盘的相对运动，将物料剪切、碾磨而达到粉碎之目的。采用风、水冷却有效地控制粉碎温度，确保被粉物料之质量。送料机构选用无级变速，可根据不同物料，调节相应的进料速度，从而得到最理想的产量和质量。通过旋风收集机构，取走成品粉，全过程无任何粉尘飞扬。
[优点]
体积小、噪音低、产量高、能耗低、操作简单、拆装方便，无任何环境污染。所得胶粉细而均匀且粉体表面带有众多毛刺形，易与其它胶体结合。
［技术参数］ 型号 | 总功率 | 进料粒度 | 成品细度 | 产量/小时 | 粉碎温度 | 重量 | 外形尺寸（米） | | XFJ-210-ⅠⅡ | 51KW | 10-30目 | 40-100目 | 80-200kg | ≤70℃ | 2000kg | 3.5×3.5×5.5 |
se：to produce fine rubber powder of 40-100 meshes.
Construction and Principle：The unit consist of three main grinder，whirlwind collecting mechanism，water cooling mechanism and a complete set of electric equipment。The main grinder consists of the fra-me，main motor，stepless variable speed motor，feeding mechanism，regulation mechanism and a pair of grinding dicss(a moving grinding disc and a static grinding disc)。
The basic principle is as follows：The material is ground under the function of the shearing and grinding activated by the rotation of the moving grinding disc。The water and the air effectively control the temperature during the grind process,thus ensuring the quality of the ground material。The stepless variable speed motor is used for the feeding mechanism。The feeding speed can be adjusted for the different material,thus achieving the most ideal capacity and quality。The end powder is sucked out under the whirlwind collecting mechanism.During the whole process，there is no powder flying。
Features：small size，low noise，high capacity，low power,easy to handle，convenience for operation and no pollution。 |
网友评价 共0条 [查看全部]