| 型号: FW-QG600 | |
| 起订: 1 | 供货总量: |
| 发货期限: 自买家付款之日起 天内发货 | 所在地: 江苏 南通市 |
| 有效期至： 长期有效 | 品牌：峰伟 |
详情介绍
- 机床的磨床主轴构Grinder machine tool spindle structure
磨头主轴套筒由前后各两套精密轴承支承，用内、外隔圈调整遇2负荷。从而达到刚度号、精度高。主轴后端由外齿轮加增强尼龙连轴套与电器外齿轮相连接，实现了主转动。优点是耐久经用，终身不用换。
Grinding spindle sleeve before and after the two sets of precision bearings by the bearing, with inner and outer ring to adjust the event two load compartment. Number to achieve the rigidity and high accuracy. Spindle back-end gear from the outside with additional reinforced nylon outer gear sleeve and electrical appliances connected to achieve the main rotation. Advantage of by the use of durable, not-for-life.
- 机床的磨头垂直升降机构（快速升降）Grinding machine vertical lifting mechanism
磨头垂直升降手摇机构采用锥齿及丝杆螺母机构，手轮置于床身上，便于操作。
第二章 机床的主要技术参数
The use of machine tools and main technical parameters- 机床主要技术规格参数Machine Main technical specifications
加工精度Precision | |
加工表面对基平行度 Surface of the base parallel processing 表面粗糙度 Surface roughness | ≦0.01/300 Ra≦0.64u |
技术规机 Technical Regulations machine | 单位 | FW-3060 |
工作台面尺寸（长×宽）Working table size (L × W) | mm | 600×300 |
左右最大纵向移动量ab0ut the maximum amount of longitudinal movement | mm | 620 |
主轴中心到工作台面的最大距离Spindle center to table the maximum distance | mm | 420 |
工作台横向最大距离The maximum horizontal distance table | mm | 310 |
前后手轮横向进给量（每格）Lateral hand wheel before and after the feed (per cell) | mm | 0.01 |
磨头升降进给量（每格）Feed grinding head movements (per cell) | mm | 0.005 |
砂轮速度Wheel speed | rpm | 2850 |
砂轮尺寸（外径×宽度×内径）Wheel size (diameter × width × diameter) | mm | Ø200×16×Ø 32 |
机床电机功率 Machine tool motor power | kw | 2.2 |
机床净重(约) Machine weight(ab0ut) | kg | 1300 |
机床毛重(约) Machine gross weight (ab0ut) | kg | 1350 |
包装尺寸（长×宽×高）Packing size (L × W × H) | mm | 1650 1200 ×1850 |
网友评价 共0条 [查看全部]