华商宝

I/A Series Advantage Upgrade Paths (01-Dec-2008)
　
 　 　 　
From To (Lifecycle Phase) Adv. Upgrade   Part / Model #s Descri-ption
　 　 　 　
CP10 FCP270 P270 The Field Control Processor 270 (FCP270) is a distributed, optionally fault-tolerant, field-mounted controller module. The FCP270 performs regulatory, logic, timing, and sequential control together with connected Fieldbus Modules (FBMs). It also performs data acquisition and alarm detection and notification. The FCP270 connects to the MESH control network via standard fiber optic 100 Mbps Ethernet. The fault-tolerant version of the FCP270 consists of two processor modules. These modules install in adjacent FCP270 slots in a baseplate for high speed communication between the modules. The unique and patented fault-tolerant operation of the FCP270 greatly imrpoves reliability relative to other process controllers. The fault-tolerant version of the FCP270 consists of two modules operating in parallel, with two Ethernet connections to the MESH control network. The two FCP270 modules, married together as a fault-tolerant pair, provide continuous operation of the controller in the event of virtually any hardware failure occurring within one module of the pair.
CP30A
CP30B
CP40A
CP40B
CP60
Micro I/ACOMM15  + FDSI (Modbus, Profibus, OPC, Data Highway +) S61 The Foreign Device Systems Integrator (FDSI) allows a wide range of choices for users to 1ink non-Foxboro devices into the I/A Series system ZCP & FCP 270 controllers. They area available with serial and Ethernet options, single and redundant 1inks, and have approval ratings for corrosive and explosive environments. Communication channels are galvanically isolated for protection. These rugged, compact modules mount in standard, field-mounted I/A Series baseplates side-by-side with other system input/output Fieldbus Modules (FBMs). Like the other FBMs, their communication with the I/A Series system and controllers is through Foxboro's high-performance (100 Mbps/1Gbps), ultra-high availability field network. Each FDSI module can support up to 16 devices to read and write data, and up to 2,000 Distributed Control Interface (DCI) points. Ethernet versions can be fewer, depending upon implementation.
COMM30A
COMM30B
　 　 　 　
AP10/20 P92 - Windows XP P92 　
AP50/51
PWs
WP20/30
AW/WP50/51
AW/WP70s