起订: | 供货总量: |
发货期限: 自买家付款之日起 天内发货 | 所在地: 安徽 |
有效期至: 长期有效 | 品牌: |
详情介绍
MR160-11C锯齿剥绒机在设计上突破了传统结构模式,抱合板、后胸板、密度板由原来圆弧型改为圆的渐开线型,并使其容积加大,使棉籽卷运转时阻力更小,减少了动力消耗;肋条加长,弧度改变,增大锯片伸出量,由原来40mm达到48mm,锯片工作齿数由57齿增到67齿,从而提高了产量。这一历史性突破获得了国家专利,给广大用户带来了良好的经济效益。
本机在整个剥绒过程中有一个自动控制和调整过程,它能按本机原理顺序的起动、顺序的停止。喂籽电机配备三相变频器(FRNE11SO.75),对喂籽量的多少进行实时控制,使棉籽卷密度得以精细调节,并保持了本机产量、质量、机器运转的稳定性。调整后运转的剥绒机每人可操作12台机器,可节约人工2倍。
该机是棉花加工厂剥绒设备更新换代的理想产品。
(棉籽含水≤10.5% 毛棉籽含绒率≥14。“二三级毛籽”)
一、主要技术指标 1. Main technical parameters | MR160-11C |
台时处理量(kg/h) Process capacity (kg/h) |
|
一道台时处理量 The first process capacity |
4000-5300 |
二道台时处理量 The second process capacity |
1200-1700 |
三道台时处理量 The third process capacity |
950-1200 |
出绒率(%)Lint output ratio (%) |
|
一道出绒率 The first lint output ratio |
1.2-1.6 |
二道出绒率 The second lint output ratio |
5.0-7.5 |
三道出绒率 The third lint output ratio |
3.5-4.5 |
片时产绒量(kg) Short-time lint output (kg) |
|
一道片时产绒 The first short-time lint output |
0.29 |
二道片时产绒 The second short-time lint output |
0.35-0.75 |
三道片时产绒The third short-time lint output |
0.22-0.4 |
二、主要技术参数 2. Main technical parameters |
MR160-11C |
锯片辊筒 Roller of saw-blade | (φ280-φ320)×1767.49(mm) |
锯片齿型角度一道为40°,二三道为28°(齿高为5-5.5mm),齿尖角20° The first of the tooth-shape angle of saw blade is40°, the second and the third is 28°( tooth height 5-5.5 mm) and the tooth tip height | |
锯片片数 Saw-blade number |
160片160 pcs |
锯片片距 Saw-blade interval |
11.11 mm |
排条框倾斜度最大 Max. frame inclination |
28-30° |
排条间隙 Discharge-strip clearance |
2.8-3(mm) |
出绒口风量 Blowing-rate at lint outlet |
1.5-1.6 m3/s(空载)(non-load) |
出绒口风速 Wind-speed at lint outlet |
19-20 m/s(空载)(non-load) |
配备动力 Power equipped |
31.35 KW |
外型尺寸 Overall dimension |
2600×1710×1840(mm) |
重量 Weight |
2t |
三、电机型号
3. Motor option
Y180M-4 18.5KW Y160M-4 11KW
Y90S-4 1.1KW Y80M2-4 0.75KW
网友评价 共0条 [查看全部]