你现在的位置:

销售/维修IWATSU岩崎晶体管图示仪CS-5000

Suitable for various semiconductor speci?cation measurementsuch as IGBTs, MOSFETs, transistors and diodes, etc..■ Maxim

  • 产品单价: 面议
  • 品牌名称:

  • 产地:

    山西 大同市

  • 产品类别:

    图示仪

  • 有效期:

    长期有效

  •  
留言询价 加入收藏
该企业其他产品更多»
销售/维修安立ANRITSU手持式矢量网络分析仪|频谱分析仪
¥面议 619人浏览

销售/维修安立ANRITSU手持式矢

推荐
销售/维修IWATSU岩崎晶体管图示仪CS-5000
¥面议 944人浏览

销售/维修IWATSU岩崎晶体管图

推荐
  • 产品详情
  • 网友评价

产品参数

起订: 供货总量:
发货期限: 自买家付款之日起 7 天内发货 所在地: 山西 大同市
有效期至: 长期有效 品牌:

详情介绍

 

Suitable for various semiconductor speci?cation measurement
such as IGBTs, MOSFETs, transistors and diodes, etc.

.   ■ Maximum peak voltage at 5000 V

     ■ Maximum peak current at 1000 A (High-current mode including CS-5200 and CS-5300)

     -CS-5200 (Maximum at 400A)

     -CS-5300 (Maximum at 1000A)

.   ■ Equipped all models with LEAKAGE mode (Cursor resolution 1pA)

.   ■ USB port for display hardcopy, waveform data (CSV format) and measurement setup SAVE/RECALL

.   ■ LAN interface for Remote Control

 

 

Curve TracerCS-5100 / CS-5200 / CS-5300

  

Speci?cations

CS-5100

CS-5200

CS-5300

Collector supply

 

Corrector supply Mode

High voltage

High voltage mode: AC, +/- RECTIFIED SIN, +/- DC, +/- LEAKAGE

High current

High current mode: Pulse

Maximum peak power consumption selecion

120mW、1.2W、12W、120W、390W note)390W can be selected excluding max. peak voltage at 5,000V range

High current mode(400W,4kW)

High current mode(400W,4kW,10kW)

High voltage mode

 

Maximum peak current(Maximum peak pulse current)

Maximum peak voltage

 

25mA (25mA)

5,000V (2,500V at AC)

750mA (1.5A)

300V

7.5A (15A)

30V

Looping compensation

Stray capacitance compensation between Collector and GND by hardware at high voltage mode. Software compensation is also available.

High current mode (only for pulse)

Max. peak current Max. peak voltage40V 40V 400A 40A

 

Max. peak current

Max. peak voltage

 

1,000A

40V

 

400A

40V

40A

40V

Pulse width / measurement points

Pulse width is variable from 50μs to 400μs at 10μs resolution, Measurement point can be set.

Maximum data points

20 to 1000 points can be set per each traces.

Step generator

 

Current mode

Amplitude range: 50nA to 200mA at 1-2-5 step Maximum current: 10times of STEP AMPLITUDE setting, O?set: +/- 10times of STEP AMPLITUDE setting

Voltage mode

Amplitude range: 50mV to 2V at 1-2-5 step Maximum voltage: 10times of STEP AMPLITUDE setting, O?set: +/- 10times of STEP AMPLITUDE setting

 

Staircase waveform: 2times of 50Hz or 60Hz

Staircase waveform: 2times of 50Hz or 60Hz (50Hz or 60Hz at AC mode)

Step rate

(50Hz or 60Hz at AC mode)

Pulse: variable from 80ms to 1000ms (Lowest frequency limited by maximum peak power consumption setting)

Pulse steps

Pules width variable from 50μs to 400μs at 10μs resolution, measurement point can be set.

Number of steps

0 to 20steps

AUX output

 

Range

OFF, variable from -40V to +40V at 100mV step

              

 

High voltage mode: 1μA/p to 2A/p (20steps) at 1-2-5 stepHigh current mode: 100mA/p to 50A/p

High current mode: 100mA/p to 100A/p

(9steps) at 1-2-5 step

(10steps) at 1-2-5 step1nA/p to 2mA/p (20steps) at 1-2-5 step

High voltage mode: 50mV/p to 500V/p, (13steps) at 1-2-5 step-

High current mode: 50mV/p to 5V/p (7steps) at 1-2-5 step 50mV/p to 5V/p (7steps) at 1-2-5 step

 

Display

8.4 inch color TFT-LCD(SVGA 800600pixels) Internal memory: 256 setups and 4 REF waveforms Date save / Recall

External: USB port for setups, waveform save&recall, hardcopy of display into removable memory
USB port

1port (USB1.1)
Remote control

 Remote control with LAN: 1port (100base-TX)
AC power supply/ Power consumption

AC90V-AC264V single phase, 45Hz to 66Hz, 500VA CS-302*1(Fixture M), CS-500*1(blank adaptor),Accessories

Operation manual*1, Wire set*1, Power cable*1

Approx. 424W×555.2L×354.5H(mm) Approx. 30kg without accessories

Approx. 424W×555.2L×221H(mm)

Approx. 45kg without accessories Operation: 0deg. to +40deg    Accuracy guaranteed: +10deg. to +35deg.Note) The above speci?cations are subject to change without notice.

 

 

IWATSU ELECTRIC CO., LTD.

International Dept.
7-41, Kugayama 1-Chome, Suginami-ku,
Tokyo, 168-8501 Japan
Tel: +81-3-5370-5483
Fax: +81-3-5370-5230

Manufactured by IWATSU TEST INSTRUMENTS CORP.

 

网友评价 0条 [查看全部]