你现在的位置:

12V20A 7段式智能蓄电瓶充电器 铅酸电瓶充电器 汽车电瓶充电器

富可思大品牌12V 20A 大功率 蓄电瓶充电器 汽车电瓶充电器 轿车电瓶充电器 。 本充电器内置智能芯片, 采用先进的7段式程序给电

  • 产品单价: 390.00元/390.00元
  • 品牌名称:

  • 产地:

    广东 深圳市

  • 产品类别:

    其他充电器

  • 有效期:

    长期有效

  •  
留言询价 加入收藏
该企业其他产品更多»
12V20A 7段式智能蓄电瓶充电器 铅酸电瓶充电器 汽车电瓶充电器
¥390.00 573人浏览

12V20A 7段式智能蓄电瓶充电器

推荐
  • 产品详情
  • 网友评价

产品参数

起订: 1 390.00元 供货总量:
发货期限: 自买家付款之日起 天内发货 所在地: 广东 深圳市
有效期至: 长期有效 品牌:

详情介绍

富可思大品牌 12V 20A 大功率 蓄电瓶充电器 汽车电瓶充电器  轿车电瓶充电器 。 本充电器内置智能芯片, 采用先进的7段式程序给电瓶自动充电。

店主推荐充电电瓶容量: 20AH - 300AH。



保护功能齐全: 短路保护,反接保护,过温保护。






充电器正器图。
 
本款充电器采用全球领先水平的智能芯片控制, 7段式智能充电,其功能如下:

1. 脉冲充电: 这个脉冲充电过程可以改变长时间内没有充电的电瓶的硫化现象,使已经出现硫化现象的电瓶完全恢复正常充电状态。 硫化现象会使电瓶内部产生的硫酸物质结晶,导致阻塞电池极片能量转换。
2. 软启动充电:这个充电过程使得能量缓慢地充入到电瓶。这样会保护电瓶,并且延长电池的寿命。
3. 恒流充电:充电器开始使用大电流进行快速充电,让电瓶达到约80%的容量。
4. 恒压充电:此时电瓶容量约为80%,充电器使用小电流充电,让电瓶达到最大容量。
5. 电池检测:充电器智能芯片开始对电瓶进行检测,如电瓶功能正常,则直接跳到第7步进行浮充,反之,则进入第6步对电瓶进行修复。
6. 电瓶修复:进入这个模式,说明电瓶需要进行修复,充电器会自动进行4小时左右的修复。
7. 浮充充电:此时电瓶容量已达到100%,用户可以拆下充电器,或继续让充电器进行充电,一段时间后,充电器自动显示充满状态。

注意:正常电瓶的情况下,充电器充电一般都是从第3阶段开始充电,只有电瓶内部硫化或严重亏电,才会开始从第1阶段进行充电。

充电器背面图: 智能温控风扇,只有内部发热后风扇才会转动。



充电器全图:电源线约为1.1米,夹子线约为1.2米。 线更长,充电更省心。


充电器专用夹子线,不是一般厂家可比的。



• Microprocessor Control (CPU).
• 7-STAGE AUTOMATIC CHARGING:
• This is a fully automatic battery charger with 7 charge stages.
• Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
• 7-stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.
• 7-stage chargers are suitable for most battery types including Calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries.
• Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM.
• Switchmode technology: Yes
• Polarity protection: Yes
• Output short protection: Yes
• Non battery link protection: Yes
• Over voltage protection: Yes
• Over temperature protection: Yes
• Cooling fan: Automatic temperature controlled.
• Input voltage: 220-240V AC, 50Hz
• Input power: 554W
• Rated output: 12V DC, 20A
• Minimum start voltage: 2.0V
• The 7 stages are: Desulphation ; Soft Start; Bulk; Absorption; Battery Test; Recondition and Float.
• Battery range: 30-400Ah
• Thermal protect (fan on): 65℃+/-5℃.
• Cooling fan: Automatic temperature controlled.
• Efficiency: App. 85%.
• Compliant standards: CB,CE, IEC60335, EN61000, EN55014
• Dimension (L×W×H): 215×115×62mm
• Weight: 1.3kg 

网友评价 0条 [查看全部]