华商宝

INSTALLATION PROCEDURES (To four electric windows closed for example)
  1).Left open the door covered, open the electric window switches combination of
       the central  corridor.                                       
 
  2).Indentify the four motor's connecting line of electric windows, not to initiate
       electric  windows in the circumstances, the two measured the electrical line is
       positively  charged or negatively, such as with positively charged, pared with
       negative trigger,  the orange line will be received negative electrode , As with
       negative is being triggered  the orange line received positive electrode.  3).Positive trigger electric windows, electric windows closed action to identify the
       positive  wires, or negative trigger electric windows ,electric windows closed
       action to identify the  negative wires, cut the wires, to control the motor action
       the corresponding line group  connected with the second-line which connected
       with  the white bars to switch to the line,  non white bars to motor to the line .  4).To check whether the line or seated properly, glass windows manually test
       whether the normal function of movements.  5).The red line of the 4P Connection connect to the power source positive pole,
       the black  line of the 4P Connection connect to the power source  positive pole,  6).4P electrical wire connecting the green line to the ignition switch ACC ,orange
       line to  negative ( - ) pulse.  7).Close ACC, locking the door lock, four car windows close in proper order;
       Open ACC , close window action will stoppage.