华商宝

CX—20TA超声波封管机：用于冰箱、空调等行业铜管封尾；真空器件铜、铝管封切。

基本参数：①标准机架尺寸：  123 x 470 x 260mm

②工作频率： 20 KHz

③机头重量：18.5 kg

④工作气压为：0.5kgf/cm²-6.0kgf/cm²

⑤工作电压：220V∽/50 Hz

⑥标称功率容量 :  3600W

⑦适应铜管：∮2-∮10mm

CX—20TA  Ultrasonic me-tal sealer：Application to refrigerator , air-conditioner copper tube sealing , vacuum parts sealing , vacuum parts copper and Al tube sealing.

Parameter：①Welder size：123 x 470 x 260mm

② Working frequency : 20 KHz

③ Welder weight ：18.5 kg

④Working air pressure：0.5kgf/cm²-6.0kgf/cm²

⑤Working voltage：220V∽/50 Hz

⑥ Power capacity :  3600W

⑦  Suitable tube ：∮2-∮10mm

焊接优点：

A.焊接材料不熔融，不脆弱金属特性
B.焊接后导电、导热性好，电阻系数极低或近乎零
C.对焊接金属表面要求低，氧化或电镀均可焊接
D.焊接时间短，不需任何助焊剂、气体、焊料

E.易实现异种金属之间的连接及自动化控制

F.焊接无火花，快速且环保安全

Welding advantage

A. Welded me-tal will not be melted down and the feature of the me-tal will not be weakened.
B. After welding, me-tal will keep the electric conduction property, and the resistivity is very low even near to zero.
C. Low requirement to the welded me-tal surface; Oxygenated or plating surface can be welded too.
D. Welding time is short, no need for any soldering fluid, gas or solder

E. Easy connection and automatic control to two kinds me-tals.

F. No welding flame, fast , environmental protection and safety

超声波金属焊接适用产品：
A.动力电池多层正、负极焊接；镍氢电池镍网与镍片焊接
B.锂电池、聚合物电池铜箔与镍片焊接；铝箔与铝片焊接；铝片与镍片焊接
C.汽车线束；电线头成型；电线互焊；多条电线互焊成线结；铜、铝线转换
D.电线、电缆与名种电子元件、接点、连接器、端子焊接
E.太阳能电池、平板太阳能吸热板、铝塑复合管滚焊，铜、铝板拼接
F.电磁开关、无熔丝开关等大电流接点、触点、异种金属片的焊接
G.冰箱、空调等行业铜管封尾；真空器件铜、铝管封切可水、气密