华商宝

CX-20S超声波金属滚焊机：用于太阳能电池、平板太阳能吸热板、铝塑复合管滚焊，铜、铝板拼接。

基本参数：①标准机头尺寸：  265x730x200mm

②工作频率： 20 KHz

③机头重量：25 kg;

④工作气压为：0.5kgf/cm²-6.0kgf/cm²

⑤工作电压：220V∽/50 Hz

⑥标称功率容量 :  3600W

CX-20S  Ultrasonic metal seam welder：Application to solar power battery , flat solar plate , PAP  seaming  welding , Copper &  Al sheet joint .

Parameter：①Welder size ：  265x730x200mm

②Working frequency ： 20 KHz

③ Welder weight ：25 kg

④Working air pressure：0.5kgf/cm²-6.0kgf/cm²

⑤Working voltage：220V∽/50 Hz

⑥ Power capacity  :  3600W

佛山市顺德区楚鑫机电有限公司是国内唯一超声波金属焊接设备专业制造商。公司拥有一批长期从事超声波基础研究和超声波焊接应用技术研究的高级人才，经过多年的基础性研发，终于突破欧美的核心技术垄断，在国内率先实现了超声波金属焊接技术的突破及实际应用，现已开发出四大系列超声波金属焊接设备：点焊、滚焊、封切、线束，广泛应用于：汽车、制冷、太阳能、电池、电子等各个领域。我司拥有“CHUXIN”、“SONICTECH”两个注册商标，分别针对不同的市场。

作为国内超声波金属焊接技术的领导者，我们通过成熟的产品和专业知识，针对各种客户的专业应用领域，为客户提供最佳的解决实施方案。 

COMPANY PROFILE：

FOSHAN SHUNDE CHUXIN M&E CO.,LTD is  the only professional manufactory in producing ultrasonic metal  welding equipments in China . We have senior engineers with rich experiences in ultrasonic welding technology research and application. With years of research , we made a breakthrough in ultrasonic metal welding technology which were monopolized by Euramerican in the past.  And we take the first to produce ultrasonic metal welder in China . By now we developed four series  products :  Spot welder , Seam welder , Sealer , Splice welder .  Applications in Auto , Refrigeration , Solar panel , battery , electronic field  and etc .  Our trade marks are“CHUXIN”  for local market  and“SONICTECH”for  abroad market . As the leader in China ultrasonic metal welder field  , we have the mature products and professional knowledge , So we can supply best ultrasonic metal welding resolution for different clients’ requirements .

焊接优点：

A.焊接材料不熔融，不脆弱金属特性
B.焊接后导电、导热性好，电阻系数极低或近乎零
C.对焊接金属表面要求低，氧化或电镀均可焊接
D.焊接时间短，不需任何助焊剂、气体、焊料

E.易实现异种金属之间的连接及自动化控制

F.焊接无火花，快速且环保安全

Welding advantage

A. Welded metal will not be melted down and the feature of the metal will not be weakened.
B. After welding, metal will keep the electric conduction property, and the resistivity is very low even near to zero.
C. Low requirement to the welded metal surface; Oxygenated or plating surface can be welded too.
D. Welding time is short, no need for any soldering fluid, gas or solder

E. Easy connection and automatic control to two kinds metals.

F. No welding flame, fast , environmental protection and safety